Sony VPL-CXZ10 Overview
Very high image quality
The long-lasting Z-Phosphor laser light source is coupled with Sony’s acclaimed BrightEra 3LCD projection engine to ensure bright, high quality images with vivid, natural colour reproduction.
Minimal maintenance
The laser light source offers up to 20,000 hours* operation without lamp exchange, reducing maintenance needs compared with traditional projectors. Near-zero maintenance is complemented by a range of energy saving features that significantly drive down total lifetime ownership costs.
Consistent brightness
Experience consistent image brightness throughout the laser light source’s 20,000 hours recommended lifespan.
Intelligent settings
Leveraging its long-term experience in laser projector development and analysis, our Intelligent Settings offer three presets, optimising brightness, cooling system and other projector settings to suit all usage environments – simplifying installation for busy system integrators.
Full HD resolution images
Equipped with the latest scaler chip, Full HD image quality is achieved ensuring all your content looks its best, whether it’s PC presentations, video or signage.
Networked control and monitoring
The VPL-CXZ10 is ideal for integration in AV environments with leading control, monitoring and management systems such as Crestron Connected.
Stylish blend-in design
The slim, stylish body features a flat top surface that blends discreetly into any space when the projector is ceiling mounted.
Specifications
| Category | Specification |
| Display System | 3 LCD system |
| Display Device | 0.63” (16.0 mm) x 3 BrightEra LCD Panel, Aspect ratio: 4:3 |
| Number of Pixels | 2,359,296 (1024 x 768 x 3) pixels |
| Projection Lens | Focus Manual, Zoom – Powered/Manual, Ratio Approx. x 1.6 |
| Throw Ratio | 1.41:1 to 2.27:1 |
| Lens Shift | N/A (Lens Offset Vertical +33%) |
| Light Source | Laser diode |
| Filter Cleaning / Replacement Cycle (Max.) | Standard mode: 1000 H (cleaning) |
| Screen Size | 40″ to 300″ (1.02 m to 7.62 m) |
| Light Output | Mode: Standard: 5,000 lm, Mode: Standard (Centre): 5,200 lm |
| Color Light Output | Mode: Standard: 5,000 lm |
| Contrast Ratio (full white / full black) | ∞ : 1 |
| Speaker | 16 W (monaural) |
| Displayable Scanning Frequency | Horizontal: 15 kHz to 92 kHz, Vertical: 48 Hz to 92 Hz |
| Accepted Signal Resolution (Computer Signal Input) | Maximum signal resolution: 1920 x 1200 |
| Accepted Signal Resolution (Video Signal Input) | NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p |
| Color System | NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60 |
| Keystone Correction (Max.) | Horizontal: +/- 30 degrees, Vertical: +/- 30 degrees |
| INPUT A | RGB / Y PB PR input connector: Mini D-sub 15 pin (female), Audio input connector: Stereo mini jack |
| INPUT B | HDMI input connector: HDMI 19-pin, HDCP support, Audio input connector: HDMI audio support |
| INPUT C | HDMI input connector: HDMI 19-pin, HDCP support, Audio input connector: HDMI audio support |
| VIDEO IN | Video input connector: Phono jack, Audio input connector: Shared with INPUT A |
| OUTPUT | Audio output connector: Stereo mini jack |
| REMOTE | D-sub 9-pin (male) / RS232C, LAN RJ45, 10BASE-T/100BASE-TX, USB TYPE-A (Only for FW upgrade) |
| Acoustic Noise | Lamp Mode: Standard: 36 dB, Middle: 32 dB, Low: 28 dB |
| Operating Temperature / Operating Humidity | 0° to 40°C (32°F to 104°F) / 20% to 80% (no condensation) |
| Storage Temperature / Storage Humidity | -10° to +60°C (14°F to 140°F) / 20% to 80% (no condensation) |
| Power Requirements | AC 100 V to 240 V, 3.4 A to 1.5 A, 50 Hz / 60 Hz |
| Power Consumption | AC 100 V to 120 V: Mode: Standard: 342 W, AC 220 V to 240 V: Mode: Standard: 326 W |
| Power Consumption (Standby Mode) | AC 100 V to 120 V: 0.5 W (when “Standby mode” is set to “Low”), AC 220 V to 240 V: 0.5 W (when “Standby mode” is set to “Low”) |
| Power Consumption (Networked Standby Mode) | AC 100 V to 120 V: 2 W (“Remote Start” is set to “On”, when “Standby Mode” is set to “Low”), 15W (ALL Terminals and Networks Connected, when “Standby Mode” is set to “Standard”), AC 220 V to 240 V: 2 W (“Remote Start” is set to “On”, when “Standby Mode” is set to “Low”), 15W (ALL Terminals and Networks Connected, when “Standby Mode” is set to “Standard”) |
| Standby Mode / Networked Standby Mode Activated | Approx. 10 Minutes |
| Heat Dissipation | AC 100 V to 120 V: 1167 BTU/h, AC 220 V to 240 V: 1112 BTU/h |
| Dimensions (W x H x D) | Approx. 371 x 100 x 319.3 mm (14 19/32 x 3 15/16 x 12 9/16 inches) |
| Mass | Approx. 5.7 kg (13 lb) |
| Supplied Accessories | Remote Commander: RM-PJ8 |
